PATENTED AWARD WINNING ENERGY SAVING AND ASSET PROTECTION COATINGS... NANOSCIENCE THAT WORKS FOR YOU.             | TOLL FREE: 800-858-3176 | INT'L +1 720-449-4121|
LeadX White or Tinted Lead Encapsulating Paint

LeadXTM White or Tinted Lead Encapsulation Coating

CUSTOMIZE YOUR ENCAPSULANT COLOR

All-In-One Lead Encapsulation Coating Solution That Can Be Used For Any Substrate, No Primer Needed!

Coverage Rate per Gallon:
450 S.F. @ 1 coat (4 mils/100 microns wet film thickness)
225 S.F. @ 2 coats (standard application)

Actual coverage rate may vary depending on surface texture. All products are sold by weight, not volume.

Available In Clear, White, Or Tinted Options.

LIMITED TIME… FREE SHIPPING!
(For Continental US ground shipping)

Buy LeadX™ Clear Here

ASK US ABOUT CONTRACTOR AND VOLUME DISCOUNTS, CALL 800-858-3176.

ABOUT LEADX™

LeadX™ is a patented lead encapsulating paint that goes on smooth and beautifully and only requires a 2-coat application.

LeadX™ white or tinted lead encapsulating paint safely and effectively encapsulates all types of interior & exterior lead contaminated surfaces, such as lead-based paint, brick, wood, metal, and concrete with a safe, effective lead paint cover. We can match major paint brand colors (Behr, Sherwin Williams, etc.) if you need a custom color. (25 gallon minimum order for custom tinting.)

Dual Safe-Coat Coverage 100% Lead Tested

Some brands need twice the coverage to do what LeadX™ can do in just two thin coats. LeadX™ encapsulation paint coverage tests negative for lead, as tested over 100% lead concentration. We recommend 2 coats to ensure adequate mil thickness and consistent coverage rates for maximum safety.

Low Odor, Environmentally Friendly

You can trust LeadX™ by Synavax™ for save lead paint encapsulating. The product is water-based, low VOC, low odor, and environmentally friendly. VOC details: Clear: 180 g/L, White: 0 g/L, Tinted: Varies according to the tint used, but typically under 100 g/L

SHOP NOW
REQUEST A SPECIFICATION

LEADX™ BENEFITS

LeadX™ by Synavax™ is the safe and trusted choice for multi-million dollar rehabilitations and priceless historic renovation and the exacting requirements of the US Military

Susan B. Anthony Voters
Block Project, Rochester, NY

Lead Abatement

Lead abatement for historical renovation project with LeadX lead encapsulating paint

Approved lead encapsulation for historical building renovation project in Rochester, NY

PROBLEM

Architecture and engineering firm, Quad3, was tasked with finding a suitable lead encapsulation coating for a $27 million historical renovation project by Home Leasing in Rochester, New York. The project includes rehabilitation of the Susan B. Anthony Voters Block area, creating 120 new and refurbished homes plus 12 commercial sites.

SOLUTION

LeadX™ clear lead encapsulation coating was approved by the New York Historical Preservation office for the project. It offered a safe way to encapsulate the lead contaminated brick for safe occupancy, while also providing an environmentally friendly, low VOC protective coating for the historical building.

American Red Cross Headquarters

Clear Lead Abatement

American Red Cross lead abatement project with lead encapsulation coating by Synavax
PROBLEM

The American Red Cross Headquarters was looking for a lead encapsulation coating that would remediate lead contaminated surfaces in an easy, cost effective way.

SOLUTION

In 2006, the Central Louisiana Chapter of the American Red Cross received a gift of $958,629 from the Canadian Red Cross specifically designated to support the construction of an American Red Cross chapter headquarters in Central Louisiana. After finding a suitable property to rehabilitate into their headquarters, they began the first phase.
The Environmental Site Assessment revealed concerns about lead in paint, brick and wood which needed to be addressed.
LeadX™, clear lead encapsulation coating was chosen to encapsulate lead and offered an environmentally friendly way to remediate lead contamination in the building to make it safe for use that was an affordable and viable option for the American Red Cross.

Second Line Frames

Lead Abatement of Reclaimed Wood

Reclaimed wood frames - They painted over the lead paint with LeadX lead encapsulation coating
PROBLEM

Needed to encapsulate any potential lead based paint on reclaimed wood being used to make picture frames without changing the distinct look of the wood.

SOLUTION

Synavax™ LeadX™ clear lead encapsulation and protective coating
Coverage: 2-coats

RESULTS:
  • Encapsulated surfaces for lead abatement
  • Allowed the beautiful colors and unique look of the painted wood to show through
  • Non-toxic, water-based, perfect for home products
  • Easy to apply and affordable

View More

National Naval Aviation Museum

Lead Abatement

National Naval Aviation Museum lead abatement project with LeadX coating
PROBLEM

The National Naval Aviation Museum, the world’s largest museum of naval aviation, was expanding to a new hangar and needed to abate lead on the hangar floor to make it safe for visitors.

SOLUTION

LeadX™ clear lead encapsulation coating by Synavax™ was chosen because of its stellar reputation by the environmental contracting industry and due to its easy application, smooth finish, and ability to be over coated by an abrasion resistant floor coating. The LeadX™ lead abatement coating played an important role in making the hangar environmentally safe from lead exposure for the many museum visitors.

View More

Commercial Office Building, Atlanta, GA

Lead Abatement

Commercial office renovation using LeadX lead encapsulating paint
PROBLEM

A large 3-story building in Atlanta, Georgia was being renovated into commercial office space. The environmental contractors hired for the job needed to find a suitable form of lead abatement that would encapsulate the lead and that was also cost effective and wouldn’t take up rentable office square footage.

SOLUTION

After initial patch tests were completed successfully, LeadX™ was chosen for use in the 30,000 SF building to encapsulate the lead contaminates. LeadX™ offered a cost effective solution and was the only clear encapsulant that could be applied to the wide variety of surfaces, including wood and brick.

View More

LeadX™ in Action

LEADX™ IS THE BEST LEAD ENCAPSULATING PAINT ON THE MARKET THAT GIVES YOU MULTIPLE COLOR OPTIONS – WHITE – CLEAR – OR CUSTOM TINT. IT CAN BE APPLIED TO METAL, BRICK, CONCRETE, WOOD, DRYWALL, LEAD BASED PAINT AND MORE TO SAFELY ABATE LEAD.

HOW DOES LEADX™ COMPARE?

ATTRIBUTE LEADX™ BY SYNAVAX™ LEAD DEFENDER BY ECOBOND LBC BY FIBERLOCK LEAD STOP® BY DUMOND LEAD BLOCK© BY INSL-X LEADCLEAR BY TARA JV CORP
Editor’s Choice starstarstarstarstar starstar starstarstar starstarstar starstar starstar
Price per S.F. at recommended coverage $0.42 / S.F. $0.18 – $0.36 / S.F. $0.51 / S.F. $0.61 / S.F. $0.81 / S.F. $1.74 / S.F.
Recommended coverage 2 coats 1 or 2 coats 2 coats 1 coat – spray 2 coats – brush/roller. 1 coat – spray 2 coats – brush/roller 2 coats
Thickness of each coat (wet film thickness) 4 mils 4 – 6 mils 7 mils 14-16 mils – spray 7-8 mils – brush/roller 16-19 mils – spray 8-9.5 mils – brush/roller 10-12 mils
Thickness of Recommended Application (we film thickness) 8 mils 4-6 mils to 8-12 mils 14 mils 14-16 mils 16-19 mils 20-22 mils
Coverage rate per gallon at recommended coverage 225 S.F./gallon for any lead cocentration 250-300 S.F./gallon OR for higher lead concentration: 125-150 S.F / gallon 80-1200 S.F./gallon for any lead concentration 80-1200 S.F./gallon for any lead concentration 85-100 S.F./gallon for any lead concentration 50 S.F./gallon for any lead concentration
Clear option check cross cross cross cross check
Texture Smooth Smooth Paint-like Aesthetics Smooth Smooth Smooth
Tintable option check check check check check cross
Mold resistant check check cross cross cross check
Interior and exterior use check check check check check check
UV resistance check cross cross cross cross check
Indoor use warranty 20 years 30 days 20 years 20 years 20 years 20 years
Finish Matte Flat Matte Eggshell Eggshell Matte
SHOP NOW
* For this comparison of popular lead encapsulants on the market, we’ve listed the attributes for five lead encapsulation products. All information was sourced directly from each brands’ website and the manufacturer product technical and data sheets. Pricing was sourced either from the product website directly, or if not listed there, from a designated reseller. Information is believed to be accurate as of 9/20/18, or in the case of LeadClear as of 8/21/19, but no warranty is made as to accuracy as product details can be updated from time to time.

BUY LEADX™

Buy LeadX white or tinted lead encapsulating paint

LEADX™ SAFE ENCAPSULATION COATING A WHITE OR TINTED LEAD ENCAPSULATING PAINT

LeadX™ is a customizable lead encapsulating paint for easy lead paint abatement. This lead encapsulating coating safety and effectively encapsulates all types of lead contaminated surfaces and can be tinted to a custom color.

Economical! Only 42 cents per S.F.

2.5x to 4.5x better coverage rate than other brands

LIMITED TIME… FREE SHIPPING!
(For Continental US ground shipping)

PERFECT FOR

  • Lead Abatement Contractors
  • Lead Abatement Remediators
  • Museums
  • Historical Societies
  • Schools
  • Child and Family Services
  • The U.S. Navy
  • The University of Wisconsin-Madison
  • …And many others

LeadX™ Safe Lead Encapsulation Coating | White or Custom Tint

Buy LeadX™ Clear Here

LIMITED TIME… FREE SHIPPING!
(For Continental US ground shipping)

Coverage Rate per Gallon:
450 S.F. @ 1 coat (4 mils/100 microns wet film thickness)
225 S.F. @ 2 coats (standard application)

Actual coverage rate may vary depending on surface texture. All products are sold by weight, not volume.

ASK US ABOUT CONTRACTOR AND VOLUME DISCOUNTS, CALL 800-858-3176.

Description

LeadX™ Lead encapsulating coating is the safe & trusted choice for major lead remediation and rehabilitation projects ranging from historical and commercial renovations to government bases.

LeadX™ white or custom tint! (Minimum 25 gallons for custom tint.)

LeadX lead encapsulating paint historical preservation project
Commercial building restoration - Lead encapsulating coating project
Museum project for lead encapsulating paint

LeadX™ is a patented lead encapsulating paint that goes on smooth and only requires a 2-coat application.

LeadX™ safely and effectively encapsulates all types of interior & exterior lead contaminated surfaces, such as lead-based paint, brick, wood, metal, and concrete with a safe, effective lead paint cover. Water-based, low VOC, low odor, and environmentally friendly.

LeadX™ is has a smooth matte finish, and can be easily tinted to a custom color. This product has been approved by the New York Historical Preservation Office for use on historic buildings (see case study).

This excellent product for lead paint abatement is easy to apply, and only requires a 2-coat application. There is a 20-year warranty for interior applications and a 5-year warranty for exterior applications of LeadX™ lead encapsulating paint.

REQUEST A SPECIFICATION

Dual Safe-Coat Coverage 100% Lead Tested

Some brands need twice the coverage to do what LeadX™ can do in just two thin coats. LeadX™ encapsulation paint coverage tests negative for lead, as tested over 100% lead concentration. We recommend 2 coats to ensure adequate mil thickness and consistent coverage rates for maximum safety.

Low Odor, Environmentally Friendly

You can trust LeadX™ by Synavax™ for safe lead paint encapsulating. The product is water-based, low VOC, low odor, and environmentally friendly.

Easy to Work With

Other lead-based paint encapsulation products can be thick, difficult to work with, and not available in the color you need. This means costly repainting over the lead encapsulant. LeadX™ lead encapsulation coating allows you to use a single product to encapsulate lead and get the color you need. This versatility is why our lead encapsulation compound has been used by museums, historical societies, reclaimed wood furniture designers, remodeling contractors, and many others looking for a white, custom tint or clear option for painting over lead paint and other lead contaminated surfaces.

Benefits

LeadX™ lead encapsulating paint is safe, water-based, low VOC, and environmentally friendly, which is one of the reasons it has been chosen by schools, Child and Family Services, the U.S. Navy, the University of Wisconsin-Madison, and others looking for safe and eco-friendly lead paint encapsulating or lead remediation.

LeadX™ lead encapsulation paint has been thoroughly tested on solid lead blocks during in house controlled laboratory testing, and was shown to stop lead leaching through the surface, testing negative for lead on the lead encapsulating paint covered surface. LeadX™ meets current HUD and US EPA lead paint regulations for lead paint abatement procedures with lead encapsulation paint.

What is a Lead Encapsulating Paint?

A lead encapsulant is a method of  lead abatement that encapsulates, or covers, the lead paint or other lead contaminated surface. Lead encapsulants should test negative on their surface for lead, which is an indicator that it is performing to abate the lead and make the surface safe. LeadX™ tests negative for lead when coated over solid lead blocks – it’s a powerful lead encapsulant!

Adhesion and pull apart strength were also tested per ASTM D-3359 (Result: 100% 5B) and ASTM D-4541 (Result: 2400-2450 psi), showing the excellent adhesion strength in our lead encapsulation compound.

LeadX™ lead-based paint encapsulation coating has also been tested individually by many environmental remediators who have identified it as their lead-paint encapsulating compound of choice.

LeadX Clear Lead Encapsulating Paint

Lead Encapsulation Paint Product Downloads

Download the data you need for your LeadX™ lead encapsulating compound project.

Product Data Sheet | Safety Data Sheet | Product Brochure

 

Compare LeadX™ with Other Lead Encapsulant Brands

Lead Encapsulation Comparison Chart

 

Additional Helpful Lead Paint Abatement Information

Facts About Lead Paint Exposure | How Do Lead Encapsulants Work? | Lead Paint Abatement for Historical Preservation | New Lead Paint Safety Standard | Calculate Lead Encapsulating Compound Coverage

 

Additional information

Weight N/A
Dimensions N/A
Gallon Size

5 Gallon

Color

White, Custom Tint

Lead Testing

Passed – Tested over solid lead (100% concentration) with EPA-Recognized lead testing method

Adhesion: ASTM D3359

Passed – 100% 5B

Pull-Off Strength: ASTM D4541

Excellent – 2400-2450 psi

Flame Spread: ASTM E84

Class A

VOC Content

White: 0 g/L, Tinted: Varies according to the tint used, but typically under 100 g/L

Type

Water-based, environmentally friendly

Coverage Rate

225 S.F. (21 m2) per gallon at the recommended 2-coat application

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Buy LeadX™ Clear Here

* Contractor Discounts Available Contact US

REQUEST A CUSTOM SPECIFICATION

Our Technical Team is pleased to assist you with a project specification and estimate to make your job simpler. Our specifications include recommendations for which product(s) to use, the thickness (number of coats) we recommend to meet your goals, application details, pertinent product data sheets and case studies. If we have all of the necessary information, we can include a payback estimate too.

LEAD ENCAPSULATION PAINT PRODUCT DOWNLOADS

Download the data you need for your LeadX™ lead encapsulating project.