Thermal Insulation and Energy Savings

Aluminum Manufacturer Review | Industrial Oven Insulation

Insulation of Extrusion & Fabrication Ovens at Aluminum Manufacturer | USA COMPANY TYPE Aluminum Manufacturer (Company Confidential) ISSUE: Heat loss from two large ovens, a fabrication oven and extrusion oven. SOLUTION: Heat Shield™ EPX-H2O thermal insulation coating 3- coat application RESULTS: 3,059 MMBtu/year estimated energy savings $8,700 USD/year estimated

Chemical Manufacturer Review | Sulfur Tank Insulation

Sulfur Tank Insulation at Chemical Manufacturing Plant | USA COMPANY TYPE Chemical Manufacturer (Company Confidential) ISSUE: They needed to insulate a large sulfur tank efficiently, while also preventing corrosion/CUI SOLUTION: Heat Shield™ EPX-H2O thermal insulation coating 8- coat application + 2 coats of Energy Protect™ for UV resistance RESULTS:

Nevada Roof Energy Efficiency | CrystalShield™ Clear Roof Coating

Nevada Residential CrystalShield™ | Roof Energy Efficiency Testimonial GEOGRAPHICAL AREA: Nevada, USA ISSUE: High energy bills and hot climate SOLUTION: CrystalShield™ clear insulating and mold resistant roof coating Coverage: 2 coats RESULTS: Lowered electricity bill Reduced heat coming through the roof into the home Provides UV resistance, keeping the

Denim Manufacturer Case Study | Drying Can Insulation

Insulation of Rotating Drying Cans | Denim Manufacturing COMPANY TYPE Denim Factory ISSUE: Save energy on a difficult to insulate piece of equipment - fabric drying cans SOLUTION: Heat Shield™ High Heat thermal insulation & corrosion prevention coating. RESULTS: 10% reduction in energy consumption Saved 2000 kg (2.2 tons)

South Africa Energy Management | Insulate Boiler for Worker Safety

Boiler Insulation to Safe Touch - South Africa Boiler Insulation | Surface Temperature Reduced by -88.7C (-159.7F) Problem An energy management company needed a good solution for their clients for boiler and steam equipment insulation that would lower surfaces for worker safety and save energy at the same time. Solution During a

South Africa Paper Mill – Steam Pipe to Safe Touch Temperature

  South Africa Paper Mill Steam Pipe to Safe Touch Temperature Surface Temperature Lowered by -158.4F (-88C) for Personnel Safety Problem Needed a durable insulation for steam pipes running at 280.4F (132C) for personnel safety. Solution When it comes to choosing the best insulation for your facility, the proof is always in

Residential Application, Dallas Texas | DIY Attic Insulation

  Residential Application - Dallas, Texas Rising Temperatures Creates Energy Issues in Texas Problem With a nationwide heat wave and rising energy costs, this homeowner was looking for an economical way to reduce the heat transfer into his attic, bring down the attic temperature and reduce the amount of energy consumption used

Narteks Textile – Reduce Yarn Dyeing Steam Consumption

Narteks Yarn Dyeing Steam Consumption Reduce Yarn Dyeing Steam Consumption - 47.5% Savings over 3 month trial Problem High energy consumption for polyester yarn dyeing process in textile manufacturing facility. Solution Synavax™ Heat Shield™ High Heat Insulation coating was applied to the exterior of the dyeing machine for insulation. Results were a

Steam Pipe – Fort Wainwright Army Base Alaska

Pipe Insulation - Fort Wainwright Army Base Alaska Problem Steam pipes and cold water pipes were running side by side in an underground utilidoor (compartments built to house piping to protect it from the freezing conditions in Alaska). They needed a thin film thermal barrier that would provide effective pipe insulation for both