PATENTED AWARD WINNING ENERGY SAVING AND ASSET PROTECTION COATINGS... NANOSCIENCE THAT WORKS FOR YOU.

Heat Shield EPX-H2O Thermal Insulation and Protective Coating

BUY NOW

 

Heat Shield™ EPXH2O is our #1
High Temperature Industrial
Protective Thermal Insulation

Proven to solve the most difficult
energy efficiency, corrosion, CUI, and safe touch problems
of factories and industries.

Technology Patented Worldwide

Heat Shield™ EPXH2O is a powerful 2-part water based reactive prepolymer that provides thermal insulation for applications where superior performance is needed. It has excellent splash resistance to chemicals. Heat Shield™ EPXH2O is splash resistant to: 98% sulphuric acid, ammonia, bleach, and other acids, bases and fuels.


BENEFITS:

* Thermal Insulation
* Energy Savings
* Corrosion Prevention
* Moisture Resistant
* Safe Touch Solution
* Chemical Resistant
* Abrasion Resistant
* 10 Year Warranty | Maintains Performance Over Lifespan
* Easy to Apply – Tough & Durable
* Use on Surfaces up to 400F/204C


PERFECT FOR:

* Steam Pipes | Pipe Insulation
* Dye Pots
* Boilers | Boiler Insulation
* Textile Equipment
* LNG Tanks | Tank Insulation
* Marine HFO Systems
* Heat Exchangers
* Dryer End Covers
* Fuel/Chemical Storage Tanks
* Other Hot and Cold Process Equipment

 

See Recent Works

Roll Over To See Details

FLIR THERMAL IMAGING VIDEO

See how 7-coats of the Heat Shield™ EPX-H2O reduced this steam pipe to a safe touch temperature.  This paper mill saw a reduction from 120C (248F) to approximately 50C(122F). That’s a difference of -70 Celsius (-126 Fahrenheit)!

SEE MORE CASE STUDIES

HAVE QUESTIONS? CLICK HERE TO REQUEST A SPECIFICATION.


Available in 1-gallon, 2-gallon, 5-gallon, or 50-gallon sizes.
(Ask about volume discounts.)

188 S.F. @ 1 coat (10 mils/254 microns wet film thickness) |
94 S.F. @ 2 coats. The actual coverage rate may vary depending on surface texture. All products are sold by weight, not volume.

ASK US ABOUT CONTRACTOR AND VOLUME DISCOUNTS, CALL 800-858-3176.

List Price: $173 US per Gallon (Sold in 1, 2, or 5 gallon kits)

Description

Be Brilliant. Buy Heat Shield EPX-H2O Now. Sustainability Simplifed™

Heat Shield EPX-H2O Downloads

Product Data Sheet |  Application and Mixing Guide | SDS Part A | SDS Part B

 

Additional information

Weight N/A
Dimensions N/A
Purchase (Size):

1 Gallon Kit, 2 Gallon Kit, 5 Gallon Kit

Color:

White, Charcoal Grey, Custom Tint

Chemical Resistance

Splash resistant to acids, bases, and fuels

Corrosion Resistance: ASTM B117

750 hours, Excellent

Impact Resistance: ASTM D2794

15 in. lb.

Flame Spread: ASTM E84

Class A

VOC Content

Less than 150 g/L (low VOC)

Type

Water-based, 2-part epoxy, non-hazardous

Coverage Rate

188 S.F. (17.5 m2) per gallon at 1-coat (10 mils/254 microns wet film thickness)

Typical Application

2 – 4 coats EPX-H2O, applied at 10 mils/254 microns each coat. No primer needed.

3 reviews for Heat Shield EPX-H2O Thermal Insulation and Protective Coating

  1. Customer Review Highlights

    “Steam consumption on our textile dyeing machines was reduced from 1,326 kg per process cycle to only 651 kg per process cycle – a 51% reduction as compared to before Heat Shield™ EPX4-H2O insulation was used.” -Elasteks Textile

  2. Customer Review Highlights

    “Having comprehensively tested the Heat Shield™ High Heat and EPX4-H2O coatings, we found they significantly reduced process energy whilst standing up to the harsh environment of an industrial dye house…reducing our process steam consumption by over ten percent – and therefore our carbon footprint by around two percent.” -Coats plc

  3. Customer Review Highlights

    “The EPX4-H2O stood up to the moist environment well without degrading. Initial temperature readings were taken on the exterior of the steam line and showed a surface temperature reduction from 160C to 80C (320F to 176F) with the coating.” -Unilever affiliate Unipro

Only logged in customers who have purchased this product may leave a review.