Heat Shield™ Translucent PT Coating

High Performance Protective Thermal Insulation & Corrosion Prevention Coating

Patented Technology


A clear, nanotechnology-based insulation and corrosion prevention coating that is designed for metal substrates, which allows visual inspections of your equipment. It bonds with the surface of the metal to prevent corrosion and CUI. It will provide you with long-term performance and durability resulting in lower maintenance costs, a longer asset life and reduced asset turnover. This industrial coating is used for pipe insulation, tank insulation, metal building insulation, chilled pipes and equipment insulation, and more. If you are tasked with saving energy, preventing corrosion and CUI, and reducing carbon emissions, this is your powerful sustainable solution. It’s simple. Just brush, roll or spray it on.

Specifications: Indoor and outdoor use. Direct-to-Metal coating for surfaces up to 256F (125C).

 Other Sustainable Leaders and Their Spectacular Solutions

View Case Studies: Roll Over Images for Summary and Link to Full Study


Coverage Rate per Gallon:
450 S.F. @ 1 coat (4 mils/100 microns wet film thickness)
75 S.F. @ 6 coats (typical application)

Actual coverage rate may vary depending on surface texture.

All products are sold by weight, not volume.


List Price: $128 US per Gallon (Sold in 5 gallon containers)


 Be Brilliant. Buy Now. Sustainability Simplifed™

Product Downloads

Product Data Sheet | SDS

Additional information

Weight N/A
Dimensions N/A
Gallon Size

5 Gallon


Applied at 170F (77C) and below: Clear with smooth matte finish
Applied above 170F (77C): Opaque with smooth matte finish

Thermal: ISO 8990:1999

34.8% decrease in thermal conduction, 3-coat thickness

Thermal: BC/BP Standard

Passed – Over 100 day test, held internal temperature under salt spray conditions, no degrading

Corrosion: GM9540P

24 cycles with no rust present (8 cycles is minimum passing)

CUI Resistance: BC/BP Standard

Passed – Over 100 day cyclical salt spray test, prevented corrosion with no degrading

Flame Spread: ASTM E84

Class A

VOC Content

100 g/L (low VOC)


Water-based, environmentally friendly

Coverage Rate

450 S.F. (42 m2) per gallon at 1-coat

Typical Application

6 – 8 coats

3 reviews for Heat Shield™ Translucent PT Coating

  1. Customer Review Highlights

    “Heat Shield™ Translucent PT coating was applied to belly and side walls of the sugar diffuser. The original operation temperature of the diffuser ranges from 90C-80C (194F-176 F). After the application of 9 coats of PT and a full curing time of 90 days the temperature on the outer skin was reduced down to between 55C-50C (131F-122 F).”
    -Illovo Sugar, Africa

  2. Customer Review Highlights

    “Equipment was insulated with Heat Shield™ Translucent PT at a 300 micron (12 mil) dry film thickness (six coat coverage). Dryer end covers were coated and showed an average temperature reduction after 30 days (prior to the full 45-60 day cure time being completed) over one dryer of 39.6 F, a 15.7% reduction in temperature, and on another dryer of 48.6 F, an 18.7% reduction in temperature.”
    -Seshasayee Paper & Boards Ltd., India

  3. Customer Review Highlights

    “Heat Shield™ Translucent PT insulation and corrosion prevention coating provided an easy to install, and long-term solution for pipe insulation that retained insulating ability over time, and stood up to humid, wet and harsh environments.

    Synavax coatings have been used by several Army Corps of Engineer locations throughout the United States.”

Only logged in customers who have purchased this product may leave a review.