Tank Insulation Coatings | Synavax™

Tank Insulation Coatings Save Energy & Protect Lifespan

Energy Saving | Anti-Corrosion | Safe Touch  

Making A Difference Daily.That’s What We Do. 60+ Countries.

Get A Free Specification Today!

Synavax™ | The Best Industrial Tank Insulation Coatings + Corrosion and CUI Prevention. Brilliant!

Synavax™ industrial tank insulation coatings are patented and precisely nano-engineered to provide you with outstanding energy savings, prevention of corrosion and CUI! An outstanding sustainable combination that will save energy, money and resources. Sustainability Simplified™.

It has been used for over a decade in multiple tank and storage tank insulation projects around the world. Our patented Heat Shield™ coating technology has solved the century old problem of corrosion under insulation (CUI) by both insulating and preventing corrosion with a single product!

Ou coatings give you an all-in-one tank insulation system with a single product engineered to stand up to the harshest offshore, onshore, and above ground environments.

We’ve got you covered!

Tank Insulation Coatings

Synavax™  Tank Insulation Coatings| Average Reported Energy Savings 20% & higher.

  • Customers typically report payback within 6-18months.

  • Fast cure lowers temperature in only 1-2 hours.

  • Energy saving tank insulation that stops CUI.

  • Splash resistant to acids, bases, and fuels.

  • Easy to apply with a texture sprayer while equipment is in service.

  • Earth friendly, sustainable, water-based, low VOC, and non-toxic.

Synavax™  Tank Insulation Coatings| Save Energy + Increase Profits!

Average Reported Energy Savings 20% or higher!

The annual global cost of corrosion is $2.5 trillion, equivalent to roughly 3.4% of the world’s gross domestic product, according to a study by NACE International. Implementing corrosion prevention best practices could result in global savings of 15-35% of that cost, or $375-$875 billion.

Source: IEEE GlobalSpec

Synavax™ Industrial Tank Insulation Coatings | Prevent Corrosion & Solve CUI 

Your Tank Insulation CAN Stop Corrosion!

The Synavax™ Team has walked through many factories around the world that were struggling with soggy tank insulation wraps falling off of their tanks, only to reveal the corrosion that the old insulation had caused; simple rust protectors don’t last long, and can’t stop the corrosion-under-insulation from eventually developing from older cumbersome insulation.

Synavax™ tank coatings solve the issue of corrosion-under-insulation (CUI)

  1. Just Spray Our Coatings On
  2. Insulate Pipes, Tanks, and Structures
  3. They’re Protected From Corrosion Too!

Synavax™ nano-engineered advanced tank insulation coatings!

Testing Shows Superior Anti-Corrosion

We don’t just expect you to take our word for it, Synavax™ thermal tank insulation coatings have been tested to the most rigorous corrosion prevention standards using cyclical salt spray and temperature flux testing methods. Here’s what you can expect:

All Synavax™ Heat Shield™ translucent coatings:

  • Passed 24-cycles (8-cycles is minimum passing) of the GM9540P salt spray corrosion test. No rust present.
  • Passed the BP (British Petroleum Standard) for Resistance to CUI, a 100 day cyclical salt spray test. No rust, no disbondment, no flaking.

Heat Shield™ EPX-H20:

  • Passed the popular ASTM B117 Salt Spray Corrosion Test at 750 hours with an Excellent rating.


  • Thermal Insulation

  • Energy Savings

  • Corrosion Prevention

  • Moisture Resistant

  • Safe Touch Solution

  • Chemical Resistant

  • Abrasion Resistant

  • 10 Year Warranty

  • No Shut Down Time

  • Tough & Durable

  • Easy to Apply

  • Best Tank Insulation System

  • Used up to 400F/204C

Industrial Tank Insulation Coatings Perfect For:

  • Storage Tank Insulation

  • Fuel Tank Insulation

  • LNG Tank Insulation

  • Chemical Storage Tank Insulation

  • Offshore Oil Platform Tanks

  • Tank Insulation and Corrosion Control

  • Industrial Tank Insulation

  • Liquid Tank Insulation Wrap

  • Water Tank Insulation Wrap

  • Water Storage Tank Insulation

  • High Temperature Tanks

  • Dyeing Tanks

  • Dairy Tanks

  • Water Storage Tanks

  • Other Hot and Cold Process Equipment

  • Other Types of  Industrial Tanks

Synavax™ Award Winning Industrial Tank Insulation Coating Technology

For over a decade, Synavax™ has served the industrial tank insulation, energy saving, and asset protection needs of multiple industries around the world, including pulp and paper manufacturing, food and beverage manufacturing, chemical manufacturing, oil and gas, textile manufacturing and many others. Our coatings represent a superior liquid tank wrap insulation that stands up to any environment without need for exterior cover. Besides just thermal protection for insulation tanks, our technology also offers several protective benefits for insulated storage tanks such as UV resistance, corrosion and CUI resistance, and chemical resistance. 

Our tank insulation coatings are designed for the harshest outdoor and offshore environments, such as those experienced by our customer Sinopec on their offshore fuel oil storage tanks, black liquor tanks in pulp and paper mills like those of Weyerhaeuser for tank insulation wrap in a liquid version, and water storage tank insulation in food safe environments, like those of client Grupo Modelo (maker of Corona Beer). Our customers choose Synavax™ industrial tank insulation coating solutions because of the superior combined energy savings and asset protection benefits.

Industries and equipment types served include:

  • Food and Beverage Manufacturing
  • Pulp and Paper Manufacturing
  • Textile Manufacturing
  • Chemical Manufacturing
  • Oil and Gas Production
  • Plastic/Rubber Manufacturing
  • Tire Manufacturing
  • Military/Defense
  • Consumer Products Manufacturers
  • And many more!
  • Chemical Processing Tanks
  • Cosmetics Processing & Insulation Tanks
  • Food and Beverage Processing Tanks
  • Oil and Fuel Storage Tanks
  • Pulp and Paper Processing Tanks
  • Pharmaceutical Processing Tanks
  • Plastics Processing Tanks
  • Water Storage Tank Insulation
  • Tank Wrap Insulation
  • Food and Beverage Storage Tanks
  • Water and Wastewater Tanks
  • Fuel Tanks
  • Bitumen Tanks
  • Asphalt Tanks
  • LNG Tanks
  • And many more…!

Learn Why Our Customers Love Heat Shield™ EPX-H2O – Tank Insulation Product Details

Heat Shield™ EPXH2O is our #1 high temperature industrial protective tank insulation coating. It is proven to solve the most difficult energy efficiency, corrosion, CUI, and safe touch problems of factories and industries. Using Synavax™ technology as a liquid tank insulation wrap gives you peace of mind for 10-years or more knowing your tanks will be insulated and protected from corrosion and weathering. Read more about this powerful, energy saving, and easy to use thermal barrier coating below.

Heat Shield™ EPX-H2O is a complete insulation system for pipes and tanks and can provide 100% insulation coverage of all odd-shaped configurations. This next generation pipe and tank insulation has you covered for all types of directives – energy savings, safe touch for employee safety, heat radiation reduction, and asset protection from chemicals and corrosion. Don’t leave uninsulated areas in your pipe and tank insulation system that will lead to heat and energy loss. Instead use an easy spray-on solution that can coat, protect, and insulate your entire tank and pipe system, including valves, boilers, heat exchangers, piping, and more. It’s better than older ceramic technology and tank wrap insulation materials that don’t fully bond with the surface or cause CUI.  Our industrial tank insulation corrosion instead of causing it!

Synavax™ Tank Insulation Coatings | See The Extraordinary Energy Savings + CUI Prevention

Industrial Tank Insulation Coating Case Study #1

This Factory Saved $460,000/year in Energy Costs

Solid Energy Saving Results!

Textile manufacturer Henateks, who makes apparel for Nike, Adidas, and Tommy Hilfiger, insulated their boiler, dyeing machines and steam pipes with Synavax™ coatings.

Project Cost: $200,000

Annual Savings: $460,000

Industrial Tank Insulation Coating Case Study #2

This Factory Saved $18,000/year in Energy Costs

Payback In Just 5 Months!

With over 30% savings on energy costs from insulating their heat process equipment, this manufacturer was thrilled to get a payback from insulating with Synavax™ Coatings in just 5 months.

Project Cost: $7,500

Annual Savings: $18,000

Order Heat Shield™ EPX-H2O – Tank Insulation Today

Order Heat Shield™ EPX-H2O 2-part Insulation Coating.

The Most Effective Tank & Storage Tank Insulation Today!

Order 1-gallon size

$173.00Add to cart

Order 2-gallon size

$346.00Add to cart

Order 5-gallon size

$865.00Add to cart

Looking for An All-In-One Industrial Tank Insulation Kit that Includes the Sprayer and More?

Order EPX-H2O Premiere Kit

Includes: A 2-gallon size of EPX-H20, a Wagner PowerTex texture sprayer, wet film thickness gauge, drop cloth.

$425.00Add to cart

See How Easy it Is to Apply

Our Gold Standard Project Promise

Our products give you tremendous potential to save energy and protect your assets.  We will help you create your personalized Sustainability Simplified™ Plan.

Gold Level Custom Project Plan

You will have your own dedicated personal to help you define your optimal Sustainability Simplified™ plan based on your goals.

Personal team review of your Sustainability Plan that is designed specifically for you along with your logistics timeframes.  Approximate time is 15 minutes.

Your  Application Handbook with Surface Preparation Checklists, Equipment Checklists and your Personalized Application Guide, with step-by-step instructions including your easy-to-track Customized Application Log designed for your project.

When you provide us with your application date(s), we will dedicate your  Sustainability Simplified™ Advisor to be on call for you at any time during your scheduled application(s) in case any questions arise.

Platinum Level Fee-Based Selections

You may rent a Dry Film Thickness (DFT) meter to ensure the highest degree of accuracy for your application.
We can provide on-site training for your team. Alternatively, we offer the option to assemble key personnel from various multi-national regions for global rollouts. Once leading company completed a world-wide adoption in 35 factories and 26 countries with in-house personnel in one year. Their bold actions produced bold results! Dream big!
We can provide you with your customized specification, product and the installation with a Professional Contractor. All you need to do is choose your installation date and we will handle the rest.  It’s that simple!

Be Bold. Join Other Sustainable Leaders!

I’m Bold, Buy Solutions Now!